There is no denying to the fact that wrought iron fences do not only provide security, but they are quite elegant too. They are also known as ornamental metal and can lend itself to various modern designs if combined with cement, brick or wood. With its perfect combination of functionality and beauty, no wonder it is one of the topmost used metal for gates and fences today. There are a various ornamental iron company out there who are providing best quality iron to beautify your homes and to protect you as well.
If you are considering building a fence yourself or thinking of hiring a professional person to do this job for you, it is always better to know what the whole process involves. So let’s seen how to use mental ornaments for gates/ fences.
1) Before building
Prior to breaking the ground for a fence, make sure, you are researching your building area code. You may need to take permission from your homeowner as it can save you a lot of trouble regarding what is allowed in your neighborhood and what is not.
Once your red tape is taken care of, plan your fence location and dimensions. Measure the area so you can estimate costs and buy materials as well. Look for and mark all the underground utility locations.
2) Set lines and stakes
Installing ornamental iron railing is not a walk in the park; it can be quite tricky. Most fence installation process is started by setting stakes and string along the fence line. A stake is driven at all the corners or all the places, which changes the direction of the fence. You need to stretch the string tightly and fasten them to corner stakes. With the help of strings, you can establish dimensions and angles.
3) Set the posts
Now that you have set the lines and stakes, its time you set the posts as well, for that you need to have a proper depth in the hole. Concrete is added to hole, which stops about 4 inches short to ground level. You need to repeat this process for all the posts. The fence builder should keep a check on the post level and plum them with the string.
Most of the holes in the posts are tightly packed with the dirt which holds the post straight with the concrete dries. Your concrete can easily be cured in a week only. However, you must know wrought iron is pretty heavy, and you need a stable post to bear the whole weight.
4) Install fence panels
You need panels to install your custom metal works Tulsa fence; all panels are lined up and installed one by one. You need to match the brackets with each panel; they are then attached with the screws starting from the top bracket further followed by the bottom bracket.
5) Hang the gates
If you wish to hang your gates further, you can settle the fence panels after installation. You will need to wait for a week, as it allows panels to adjust before you hang a gate. You can attach the gate by using hinges and latches that come with the gate.
Your fence is all ready now!