As you work toward ending up being a skilled dye-sublimation printer to make SUBLIMATED JERSEYS, you may find several challenges such as your transfer appearing fuzzy, plain or faded. Don't get prevented! This is all part of the knowing procedure, and also most of our new sublimation clients experience a trial and error period. We've compiled several of one of the most frequent concerns connected with dye-sublimation printing in case you ever before experience one.
Why aren't my transfers coming out dynamic?
There are a few reasons why your transfers could be appearing much less lively than expected. First, see to it that you are printing on the right side of your sublimation paper, which is generally bright white. The other side is generally off-white. If you're printing with a Sawgrass Virtuoso SG400 or SG800, the bright white side will fill face-down in the tray. Next off, guarantee that you are publishing through the right color improvement program.
Why is my image ghosting?
If you are seeing a 2nd variation of your transfer, like a shadow, somewhat to the side of your picture on SUBLIMATED JERSEYS, you are experiencing what is called ghosting. Ghosting happens when the sublimation transfer paper changes throughout the sublimation procedure, such as when you open or close your warm press. For this reason, it is recommended that you tape down your tough substrates to the sublimation paper utilizing thermal tape. For fabrics, we suggest a glue spray to avoid the paper from relocating. After pressing, see to it you eliminate the transfer paper right away. For sublimation, we likewise recommend preventing making use of a vehicle open press as these have a tendency to pop open also quick, triggering the paper to change otherwise taped down all right.
Why is my substrate not accepting sublimation ink?
It is necessary to keep in mind that not all products accept sublimation ink. For dye-sublimation to work, your item empty demands to have a polyester finishing (or be constructed from a polyester material).
For materials, we suggest 100% white polyester for the very best transfer of SUBLIMATED JERSEYS. It is not feasible to sublimate on 100% cotton-- and your transfer will certainly get rid of in the first wash cycle. You can sublimate on poly/cotton blends, yet the transfer will appear much less dynamic and also offer a classic appearance. In general, the higher level of polyester, the much better.
Why am I getting ink from a previously transferred picture onto a brand-new blank transfer
Sublimation ink has the propensity to bleed onto the bottom and leading platens of your press throughout warmth transfer, which is why it is very important to protect your press with the correct material. To stop ink from getting onto your top or bottom platen, we suggest utilizing a Teflon wrap for each and every platen, in addition to a Teflon sheet. Teflon is completely recyclable, and all it takes is cleaning away the excess ink after each press. You might likewise use silicone-treated sheets that can be discarded after use.
Why am I seeing small dots in my transfer?
If you're discovering little dots on your ended up SUBLIMATED JERSEYS, this is likely because of excess dampness. We recommend pre-pressing most substratums to ensure you obtain all wetness out. Then, let the substrate cool off, place your transfer on, and press like regular.
Why are my transfers blurry?
If you observe blurring in your image when you draw the transfer paper off, this may be because your substrate got too much time/temperature in the warmth press, and also currently the picture has actually started to hemorrhage out. If this takes place, we recommend lowering your time and also attempting once more.
Why are my pictures coming out faded?
Image fading is normally caused by excessive time and temperature, and/or stress. We recommend verifying the recommended settings from the company where you acquired your sublimation blanks. Every warmth press is various, which is something to keep in mind. Another recommendation is to confirm the temperature level of the leading platen on your press to ensure it straightens with the specified temperature; for this, we recommend heat strips.