In the autumn, the boats that are afloat move much more than the rest of the year. Apart from choosing the correct boat fenders, it is essential to know how to position boat fender locks so that they are effective. Boat fenders are the bumper of the boat. Their up-to-date condition and proper use is as important as making a good mooring maneuver.
Boat fenders are the bumpers that protect against bumps and scratches. Its function is, therefore, to "defend" the hull of the ship from any blow that can cause various degrees of damage. Check our top quality Quick boat fenders for sale.
Different types of Boat fenders for sale
The most common material in the manufacture of boat fenders is PVC with an internal air cushion to absorb the impact. This material guarantees the best shock absorption as long as the air pressure is adequate. They must also withstand the effects of the sunrays over time.
• Cylindrical boat fenders: They are the cheapest and easiest solution to install and protect most of the berths and when the boat is on the dock or on the edge. Cylindrical boat fenders can be placed vertically or horizontally to protect a greater length. Its length should be equal to 2/3 of the height of your ship's siding.
• Flat boat fenders: They are rigid and made of polyethylene foam. They are used when the space between two boats is very small. They have the advantage that they neither roll nor rise. Flat boat fenders can also be used for inflatable boats as they adapt very well to their shapes.
• Bow Fenders: They are inflatable and made of PVC. Bow Fenders are used to protect the stem and are very well placed on the bow of the boat.
• Stern boat Fenders: They are inflatable and made of PVC. Stern boat Fenders are used to protect the rear area. Due to their shape, they are placed very well at the stern of the boat.
• Adaptable boat fenders: They are inflatable and made of PVC. Adaptable boat fenders are up-to-date models with multiple functions thanks to their ease of adaptation. They can be used to protect the boat and to cover the possible contact areas of the dock or jetty.
Boat fenders: does size matter?
But what dimensions should we choose them from? If you have doubts, choose the largest one. Some motor boats have racks attached to the balcony installed on both tackles to house the boat fender locks and fenders when they are not being used.
A minimum of six fenders must be placed, regardless the length of the boat, and a seventh larger in diameter than the rest.
How to place boat fenders
If we are going to tie you boat sideways to a dock, the usual thing is to place the boat fenders just above the waterline without touching the water. The average height of the fender must coincide with the most threatening part of the jetty.
If we are going to encompass the ship to another, the correct placement of the fenders and boat fender locks is even more important since the damage can be more serious. We will place the fenders in the widest area of the boat and at a sufficient height to protect the two sides. Take advantage of our boat fenders for sale.