Choosing the best gate operator

Many fireplaces choose to motorize their gates for aesthetic and comfort reasons. Indeed, with an electric gate, you will no longer have to expend effort for opening and closing. To do this, press the button on a control or remote control or dial the code on a box. The opening system varies on each system and even if you like the one with the control, you must consider several elements and criteria when choosing the operator for your gate. To advise you, do not hesitate to call on a professional.

The elements to check before choosing the gate operator

Before even going through the advantages and disadvantages of each automation system, it will be necessary to check certain elements. Inspect whether your gate and its fastenings are suitable for the operator. If the fasteners are not strong enough, they should be checked before installing the motor for automation. For a PVC gate, it must be ensured that there is a recessed metal frame. It is imperative to have a flat floor so that the movement of the leaves is not disturbed by friction on the floor. Note that you will not be able to open your gate on the public highway. For this automation, it will also be necessary to provide a signalling device for passers-by. Before going to a professional to ask for a quote, you should not forget the measurements of your portal.

The most important criteria when choosing an engine

For your choice, you must consider the type of portal you have. A particular drive system may be suitable for a swing gate, but not for a sliding gate. The weight of the gate will also be a decisive criterion in this choice of operator. Each drive system will have the maximum gate weight it can support. To do this, you must choose a system that supports the weight of your portal and it is even better to take a system that supports a little more. It will also be necessary to see if the motor is not too powerful, because it risks damaging the gate. The gate drive will probably require an electrical source. However, you can choose a wireless system or a solar system.

The operator for the swing gate

For your single or double-leaf swing gate, you can opt for either the arm operator or the cylinder operator. For the first system, you will have two arms installed on each leaf, the rf remote control will activate it to open and close the gate. For the actuator with a cylinder, you will have a cylinder on the hinges. For this type of motorization, you must contact a professional for installation. You can also choose the wheel drive which is less aesthetic, but it is the cheapest of the whole collection.

The operator for a sliding gate

It is clear that the system with articulated arms will not fit a sliding gate. It is necessary to choose a motorization allowing a lateral sliding for the opening and the closing of your gate. The operating principle and installation will be less complex, but when choosing the system, you will have to consider the weight of your gate.

Underground gate operator

If you want to keep the aesthetic side of your gate, you can opt for underground motorization. This system is distinguished by its discretion and is more suitable for swing gates. For installation, the motor will be buried at the foot of the gate and only the arms will appear. For this system, it is also necessary to call upon a professional.