Every user of the Canon inkjet printer will have the opportunity. The reason for Canon inkjet printer malfunction is varied, but its key is canon mx922 B200 error code. The B200 error may point to things that are different, but it is a problem with the print head. The difficulties in general, related to the use of the full residual ink tank, the region together with the complete residual ink pad of the print head.
For their B200 Error Code on Canon MX922, Canon technicians urge customers to regularly fix this problem. This recommendation like ON and then Off this printer. But we found it.
First reasons:
The printer error occurred when a newspaper was published and the ink was completely empty, under circumstances where a cartridge is completely empty.
Based on Canon, it is also due to cartridges abroad where the printer cannot cope. Evaluating and cleaning the print heads can help with the error. However, you should remember this as an alternative if the printer is insured as it could damage the print head as the warranty may be voided.
Second reasons:
Another reason for the error usually occurs when using different formulations of printer ink. This error sometimes occurs if you replace or replace an OEM cartridge with this item and not the normal priced products that have a toner gauge and / or questionable build quality.
There are two stages to resolve this error; technical stage of hardware and technical stage of printer applications.
Stage 1: Hardware technical stage
At this stage, we have five options to correct the B200 printer fault code. These alternatives come after the error they face.
Take a look at the repairs and the solution of this problem, we will guide you incrementally to solve this problem.
Option 1
Open the printer cover, and then display the ink cartridges.
Dispose of the print head in the printer with caution.
Clean the print head along with all the ink cartridges.
Clean the printer's touch pads with a touch cleaner or a fantastic pencil eraser.
Reinstall the ink cartridges before storing the printer.
Option 2:
Turn off the power of this printer.
Open the print head compartment (as if you were changing inks).
Wait for the print carriage to start moving to the left and allow it to move past the middle.
Before printing the carriage reaches your hand (but after moving halfway), close the cover.
He turned the printer over again.
Many printer users try this easy solution and the problem of these printers is solved.
Option 3
Open printer
Dispose of the ink cartridges.
Clean the back of the print head (finger pins) with alcohol (isopropyl cleaning alcohol when possible). Make sure the hooks are 100% clean.
Turn off the printer (don't turn it off!) By plugging in the power cord (do not use the power button).
Clean the electronic pins on the printer (where you put the print head). Make sure your wash is 100%.
RE configure the print head, then load the ink cartridges.
Turn on the printer normally.
Check if the printer works normally (without errors).
Option 4:
Turn off the printer.
Open the printer cover and remove the color cartridges.
Eliminate the sled where the capsules were previously placed.
Wash the capsules with water with caution. For maximum benefits, wash it with isopropanol (there at the pharmacy), so the print head is not clogged with lime.
Make sure the gold contacts are not wet, otherwise you may damage the print head.
Dry everything carefully, make sure no residual water gets into the printer.
Reinstall the capsules and carts in the first location.
Turn on the printer.
In case the "Error B200" concept appears, the printer should be turned off again. Along with before turning on the lid should open. The printer performs a self-test, the error should not be repeated frequently, it works, turning on with the open and the problem solved.
Option 5
Push the entire printhead mechanism toward the center.
While the printer is open, turn on the power, and then turn it on.
Once the print head still moves and moves exactly LEFT, close the cover.
Wait until it starts.
When you have tried and follow the next step in this initial stage manual along with the error that still appears on your printer, continues with the next phase below.
Stage 2: Technical stage of the software
Within this stage, you will need to obtain an online link and administrator access on a computer.
Click "Start" on the Windows desktop and click "Devices and Printers".
Right-click on the Canon MPxxx (based on your Canon code model) and click "Properties".
Run a Nozzle Check in the Maintenance tab after deep cleaning is done.