Having a location in your own garden where you could take a dip is fantastic and to make sure this feature stays in the perfect condition it is critical that come winter you ensure necessary swimming pool maintenance is carried out.
You could contact swimming pool companies here for tips on how to undergo this technique or about any chemicals which are required, or you may hire an expert to hold out the job.
However, if you wish to conduct the duty yourself there are a few things you have to endeavour to complete to be sure the job is carried out correctly.
A good time to begin closing down your pool is when regularly falling leaves begin to herald the arrival of autumn. Once the temperature throughout the day dips to typically between 16 and 21 degrees Celsius, it's a great time to begin considering escaping the wintertime cover.
It is typically too cool at this time of year to get a regular dip anyway, although you can choose to leave it until later if you wish.
However, many pool owners like to begin with on the job early in the autumn before a lot of leaves fall under the water. Any tree matter that lands in the pool should be removed, as failure to take action could see the develop of algae increase, therefore you are far more probably be greeted by a green swamp-like sight when you pull back the cover come spring.
You can get most of the leaves out either employing a net or a vacuum - which you might be in a position to hire for the afternoon from a specialist pool supplier.
Whether or not you drain any water from your pool when you close it down is your decision and can depend on which lining you have.
When you have ceramic tiles around the outer lining line for decorative purposes you might wish to drain the water, as in the cold the liquid might lead to these to crack.
Another reason to take a number of the water out of the feature is so that you can avoid plugging up all the pipes. However, numerous others choose to allow the water stay at a far more regular level as this gives support from below once the cover is pummeled by rainwater and can help prevent sagging.
The most crucial step is to ensure that the filter system is thoroughly cleaned and drained. You need to make certain that most of the water and debris has been removed. You should have plugged the return jets and once you have washed your pump you can leave it somewhere to drain.
Once the jet, skimmer and drain pipes are vacuumed you can mask any exposed holes and pipes to prevent water from getting in if you have decided not to empty some of your pool.
The reason you will need to take such care with the pipes and filter system is when water gets within over the wintertime, once temperatures hit freezing it'll turn into ice and expand, causing cracks and possibly a leak.
It's also advisable to make an effort to provide your filter the once-over when you store it away as it may need replacing - something you may consult a drainage specialist about.
Next you will have to put chemicals in if necessary, after removing any toys or inflatables which were left in the water. However, you can consider adding some large Styrofoam floats if your pool is lined with vinyl as it will help to avoid the outer lining of the water freezing and causing damage.
Don't forget to eliminate any diving boards or slides when you pull the cover tightly over the hole to make certain that it's fully protected.
It is very important it's kept taut as this can stop the material from sagging, which may mean it needs replacing sooner than it was designed for.
Although your pool is now tucked up for the wintertime, it could still present a danger, particularly if an unsupervised child or pet is able to get under the cover and gets trapped - so make sure they are watched all the time when near it.
Now your pool is prepared for the cold snap, you can get on with your essential garden maintenance so that most your outdoor space is going to be looking its best when spring arrives.