Unable to mark your brand logo permanently on the product?
Let us introduce the best laser marking technology to help you find one in all solutions to all your problems!
Laser technology introduced by Albert Einstein in 1917 was proposed as the concept of stimulated emissions and 9 decades later with the advancements in technology it became the most versatile marking technology to permanently mark the products for identification and traceability.
LBT100 is one of the perfect laser bonding solutions that helps you bond the identification and personalization mark permanently on any surface including, glass, stone, metal, and ceramics. The benefits of using the solution can be listed as followed:
High-speed low cost:
Laser bond100 is a laser marking solution that helps you produce a dark, durable mark on the surface at high speed and low cost. LBT100 has been tested with many different solutions like Cermark, Enduramark, and CRC Dry Moly Lube but gave “A” grade results among all. It can be used over a range of shapes and sizes to deliver results within seconds. The solution comes in two major formulations, i.e. ink and spray. The ink needs to be diluted before use and costs a little less than the laser marking spray. The ink cost $0.01 whereas the marking spray is $0.03.
High Precision:
Precision is one of the most important elements that is required while marking any product for its identification. Therefore, laserbond100 is one of the most perfect solutions that help to mark the product with the highest precision. Whether it be some product of glass, or any surgical instrument requiring extreme precision. It helps to mark the surface anytime anywhere with perfect precision. Barcodes and QR codes that store large amounts of store data can be marked with the product due to its high precision. The quality of the mark is never compromised no matter how small the surface is.
Damage protection for the surface:
What would be the benefit of using any marking product if it damages the surface instead? None. Hence, avoid causing any damage to the surface and use LBT100 for product identification and personalization. It is an easy-to-use solution that requires no effort if used in the form of spray and just a bit of proper ratio dilution if used as ink.
Spray or airbrush the marking solution (wait until it dries)
Laser mark the surface
Wash away the residue
Yes! It is that easy and simple!
Corrosion Resistant:
Once marked, it is important that the design or formed texture does not fade away. Therefore, use the solution by laser bonding technology to produce a dark and durable mark. The solution is resistant to harsh environmental conditions and is proven against acids. Perfect for the medical and aerospace industry. For more information about marking technology check this official website.