GE Universal Remote - Without Code

How to Program a GE Universal Remote - Without Code

Remote controls are one of the most valuable items in your house. It's time to set up a GE Universal Remote without codes if your house is filled with too many remotes. Your GE Universal Remote can be set up in a matter minutes.

Last but not least, many devices, including televisions, DVRs and DVD players, have remote controls. It is easy to lose track of which remote controls which devices. A universal remote for a GE 4 device is able to turn on and control any equipment or device in your house. Let's see how to program a universal remote for television without having to use any codes.

Read More : How to Program a GE Universal Remote to a TV Without Codes

How to Program GE Universal Remote Without Codings To A TV

You can manually enter codes, use the GE remote code search tool or the brandcode search technique to set up the GE universal remotely. Here are the steps:

Directly enter the codes to program a GE Universal remote

You must first remove the battery covers and batteries to read the model number. Jasco is one of the many websites that offer the GE universal remote code for your model.

Step 2: Select the appropriate GE universal code and turn on the device (TV, DVD player/DVR, etc.). ).

Step 3: Press the "Setup" button and hold it for a few second until the indicator lights change to "RED". Then, select a parallel device like "TV," DVD," or "AUX" and press the button.

Step 4: Enter your code. You can enter either 3-digits, or 4-digits. If the code is correct it will turn the indicator light "OFF".

Step 5: Press the "POWER” button and hold it down. If it turns "OFF", then you've successfully programmed this gadget into your remote control.

If that fails, keep going until you find a GE-code that works.

How to Program a Universal Remote to a TV with No Codes Using Automatic GE Remote Codes Search Method

You can use the automated code search to find the code for your brand or equipment type. The GE universal Remote can scan the entire remote code database and verify multiple codes at once. Use the automated search method to follow the instructions for GE Universal Remote Setup without a Code.

Step 1: First, locate the version number of your GE programmable controller and turn "ON" on your television or any other device that needs to be controlled.

Step 2: After selecting another device (TV/DVD/etc.), hold down the "SETUP” button. ).

Step 3 - To turn the gadget "OFF", press and hold the "POWER” button.

Notice: When programming a DVD-player with a V2, or V3 remote, hit "PLAY" then wait for the device's to begin playing.

Step 4: Re-press the "POWER/PLAY” key after 2 seconds. The gadget will then be turned off.

You should note that the V2, V3, V4 remotes will send the command every two second.

Step 5: To lock code, press the "ENTER/OK” button on your remote. The indicator light will go "OFF" when you enter the code correctly.