The Guide to Creating a Safe Playground

To build a playground that is safe for your children, you need to follow a few guidelines. First, ensure that the 안전놀이터 is not built on concrete. This will minimize the impact of falls and the pressure that the place of the fall on the joints. You also need to make sure that the guardrails are secure.

Inspections

To make sure your playground is safe, you should regularly conduct inspections. You can choose a routine based on the level of usage, environmental conditions, and the type of equipment and surfacing. More frequent inspections are recommended for playground components with moving parts. A qualified playground inspector can determine whether any components are unsafe and recommend the appropriate repairs. The inspections should be performed by someone who is not associated with the playground operator.

A playground inspection should be conducted on an annual basis or when there are any significant changes to the equipment. In addition, the safety inventory should be updated whenever a major change occurs. The inventory should list all of the different pieces of equipment, as well as the manufacturer, date of manufacture, and type of protective surface.

Quality equipment

Purchasing quality playground equipment is an important part of maintaining a healthy play environment. While you should always choose equipment that is appropriate for the ages of your children, you should also consider its safety as well. In the United States, playground safety standards are set by the Consumer Product Safety Commission (CPSC). These guidelines are intended to protect children in playgrounds from harm.

In addition to quality playground equipment, your playground also needs regular maintenance and inspection. This includes routinely assessing each piece of equipment to detect splinters, rot, and rust and inspecting for any cracks and breakages. In addition, you should also pay special attention to swing chains, swing seats, and other equipment with moving parts and steps.

Soft surfacing

When you plan to install a playground, one of the most important considerations is the safety of the equipment. A child's fall is the most common cause of playground injuries, and the surface material should cushion the impact. Several different materials are available for playground surfacing. The type of surfacing you choose should match the theme and design of the playground. As well as improving the 안전놀이터 of the equipment, the right surfacing will also improve the accessibility of the playground for people with disabilities.

Whether you want to install a playground for your local park or an entire school, there are a variety of safety surface options available. Many of these materials are non-toxic and eco-friendly. You can choose recycled tires or fresh wood fiber for your play area. Recycled tires are environmentally-friendly and are available in bright colors. These surfacing options are durable and long-lasting but require periodic topping off.

Open slides

Open slides in a playground can pose a serious hazard for children. They should have rails that extend at least four feet above the ground and a ladder or handrail to climb up and down. Slides made of metal can become hot and should be kept out of direct sunlight. Plastic slides are a better choice, but should still be inspected before use. Slides should also have a platform or rail at the top so that children can sit or stand before sliding down. The sides of the slide should also be at least four inches high.

Children should be carefully supervised when playing on playground slides. Parents should keep in mind that open slides can cause serious injuries, especially to young children. The National Program for Playground Safety warns that slides can reach temperatures of 189 degrees, which is enough to burn a child within three seconds. Kids may think the slide is safe because it is at the top, but the bottom might be much hotter.

Supervision

One of the most important safety practices for a playground is supervision. To make sure children are safe, playground staff should have a clear line of sight to all areas of the play structure. They should rotate frequently and identify flex monitors when needed. In addition, it is important to monitor how much time children are spending in each area of the play structure. If they are spending too much time in one area, they should be reminded to move around and avoid chatting with one another.

Lastly, supervisors should post visible signs that indicate the age range of different playground equipment. These signs will help keep children safe and prevent unsafe activities. It is especially important for public playgrounds where parents and visitors expect to supervise themselves. In addition, playground owners should follow the guidelines of the Consumer Product and Safety Commission (CPSC) and ASTM. For more detailed information, check out the CPSC Handbook on Playground Safety.

Documentation

Creating and maintaining a safe playground requires a thorough inspection of its equipment and surfacing. It is important to use the proper forms and procedures to document what goes wrong and what needs to be done to fix it. These documents should be easy to use and should follow the guidelines of the manufacturers of playground equipment.

A comprehensive safety playground plan should include the following: identification of hazards, the installation of appropriate playground equipment, and the training of staff. The plan should also identify critical heights and designate play surfaces. A critical height is a height below which life-threatening head injury is unlikely. A designated play surface is a flat or elevated surface that is at an angle less than 30 degrees from the horizontal. A slide that follows the contour of the ground is considered an embankment, as its bottom is typically 12 inches above the surrounding area. The critical height and designation of play surfaces should be carefully monitored and maintained.