Why does the printer show the connecting error on the PC?

Printers are essential tools for any small or large business. The latest models of printers are compatible with the majority of the devices and are simple to set up. Users can configure their printer, and then take prints with confidence. However, some users experience issues with connection to printers. The device could experience problems with connection due to a variety of causes for canon mg3600 not connecting

Common causes behind the printer connection error

1. You're using an unreliable or damaged cable

2. The USB port isn't working.

3. Physical WPS pin isn't readily available.

4. The firewall is limiting the connection

5. Connection to the printer not working

6. Malware has stopped the connection to printers

7. Troubleshooting printer connection error

8. Restart the printer power source.

Printers can run into trouble with connection when their service files aren't functioning properly. These files require a restart to correct the issues. Simple printer restarts aren't enough to fix the issue and power resets the printer. When the printer is on disconnect from the power cable. Reconnect the power cord after 1 minute and your printer should be able to start immediately. The printer's services will begin in the background and you are able to connect the printer. Check the status of the PC on the desktop and then open the printer. the status of your printer. When your printer is operational you can open a document and print the document with confidence.

Verify the driver for the printer on the computer

The printer could experience issues with connections if it's unable to locate its software. It requires the use of a driver to configure it. If your printer isn't functioning, check the driver. On your PC, open the folder for drivers and look for the driver of your printer. Click it to download the latest version. If the driver isn't updating and is showing any error, you can fix it. Find and install a repair tool for drivers on your computer. The tool will be run and will repair your printer's files. Restart your computer and attempt to establish an internet connection. In case the driver not working, you must eliminate it. Take out all driver-related data and then reboot the computer. Install a brand new driver for your printer, and then look for connectivity issues.

Run a printer troubleshooter

Printers may experience errors when printer-related files aren't working. The files could be damaged due to errors in the runtime. To repair the printer-related file, start the troubleshooter for your printer. This built-in tool on the PC will examine every printer-related file. Start your PC and look at the term Printer Troubleshooter. Choose the name of the printer and then run the troubleshooter. The program will begin to examine all printer files on the computer. After the repair, you'll see a report appear on the screen. The printer should be connected to your PC and look to whether it has an error.

Make sure you check the firewall

Printers can experience problems connecting to the network because of the firewall. The firewall blocks all unauthentic connections. If a printer attempts to establish a connection; your firewall immediately investigates the connection. The connection error usually occurs when a user attempts to scan an image. Sometimes, printing functions work properly on the network however it appears to be displaying the Brother scanner is not connecting to the computer. Your firewall is preventing your scanning requests. To resolve the issue it is necessary to disable the firewall. The printer will now be able to join the network. Open the computer and remove the firewall on your personal computer or built-in on the network.

Verify the WPS settings for WPS.

The printer may show connectivity problems on the network because of the wrong WPS settings. When you connect to the router, verify whether it has a WPS pin. The printer can only connect to the network if the router has a physical WPS pin. Connect the printer device and press the Wi-Fi button. The Wi-Fi light will begin blinking, make sure the router is on and you have enabled your WPS pin. Your printer will scan the networks that are available. Select the appropriate network name, then set up the connection. You can now send jobs and get prints with confidence.